Siffofi
• Don sandunan da ba a taka ba
• Hatimi Guda Ɗaya
• Daidaitacce
• Ba tare da la'akari da alkiblar juyawa ba
• Gilashin ƙarfe yana juyawa
Fa'idodi
• Don matsakaicin zafin jiki mai tsanani
• Babu O-Ring da aka ɗora da ƙarfi
• Tasirin tsaftace kai
• Tsawon shigarwa mai tsawo zai iya zama gajere
• Sukurin famfo don kafofin watsa labarai masu kauri sosai (ya danganta da alkiblar juyawa).
Shawarar aikace-aikacen
• Masana'antar sarrafawa
•Masana'antar mai da iskar gas
• Fasaha mai tsaftacewa
•Masana'antar man fetur
• Masana'antar sinadarai
• Masana'antar fulawa da takarda
• Kafofin watsa labarai masu zafi
• Kafofin watsa labarai masu kauri sosai
• Famfo
• Kayan aiki na musamman na juyawa
Kayan Haɗi
Zoben da ke tsayawa: MATAKI/ SIC/ TC
Zoben ROTARY: MATAKI/ SIC/ TC
HATIMIN BIYU: GRAQHITE
SASHE NA BAƘI DA ƘARFE: SS/ HC
A ƙasa: AM350
Takardar bayanai ta WMFWT na girma (mm)
Fa'idodin hatimin ƙarfe na ƙarfe
Hatimin ƙarfe yana da fa'idodi da yawa fiye da hatimin turawa na gama gari. Fa'idodin da ke bayyane sun haɗa da:
- Babu zoben o-ring mai motsi wanda ke kawar da yuwuwar ratayewa ko lalacewar shaft.
- Gilashin ƙarfe masu daidaita da ruwa suna ba da damar hatimin ya iya jure matsin lamba ba tare da tarin zafi ba.
- Tsaftace Kai. Ƙarfin centrifugal yana fitar da daskararru daga fuskar hatimin - Tsarin datsa yana ba da damar shiga cikin akwatunan hatimi masu tsauri
- Ko da loda fuska
- Babu Maɓuɓɓugan Ruwa da za su toshe
Sau da yawa ana ɗaukar hatimin bellow na ƙarfe a matsayin hatimin zafi mai yawa. Amma hatimin bellow na ƙarfe galibi suna da tasiri a cikin nau'ikan aikace-aikacen hatimi daban-daban. Mafi yawan waɗannan su ne aikace-aikacen sinadarai, na famfon ruwa gabaɗaya. Tsawon shekaru da yawa ana amfani da nau'in hatimin bellow na ƙarfe mai araha sosai a cikin masana'antar sharar gida/najasa da kuma a gonakin noma ana fitar da ruwan ban ruwa. Waɗannan hatimin galibi an yi su ne da bellow da aka ƙera maimakon bellow da aka ƙera. Hatimin bellow da aka ƙera da walda sun fi ƙarfi kuma suna da kyawawan halaye na lanƙwasa da farfadowa waɗanda suka fi dacewa don riƙe fuskokin hatimi tare amma suna da tsada sosai don ƙera su. Hatimin bellow na ƙarfe da aka ƙera da walda ba sa fuskantar gajiyar ƙarfe.
Domin hatimin bellow na ƙarfe yana buƙatar zobe ɗaya kawai, kuma saboda ana iya yin wannan zoben o-ring da PTFE, hatimin bellow na ƙarfe suna da kyau kuma suna da kyau a aikace-aikacen sinadarai inda Kalrez, Chemrez, Viton, FKM, Buna, Aflas ko EPDM ba su dace ba. Ba kamar hatimin ASP Type 9 na o-ring ba zai haifar da lalacewa ba saboda ba shi da ƙarfi. Dole ne a yi shigarwa da zoben PTFE tare da ƙarin kulawa ga saman yanayin shaft, duk da haka ana samun zoben o-ring masu lulluɓe da PTFE a yawancin girma don taimakawa wajen rufe saman da ba daidai ba.
